The installation of a wall toilet is becoming increasingly common in our modern bathrooms. However, your installation requires a certain technology and special care. Are you looking for a new toilet for your bathroom? Then here are the main steps for your toilet installation.
Prepare your installation room
Before you install your wall hanging toilet Start, it is important to prepare your job thoroughly. Make sure that the bathroom is spacious enough to wear your toilet frame and that the wall where you want to install is strong enough to wear the weight of the set.
It is also important to make sure that the water drain is correctly positioned and is within reach of the toilet drain pipe. Finally, check the dimensions of the toilet bowl to ensure that it fits perfectly into your bathroom.
Assembly of the pre -conversion element
The Pre -change element is the metal construction that is attached to the wall and later carries the toilet bowl. It also contains the flushing tank and the rinsing mechanism. Therefore, it is important to install it properly.
The first step is to assemble the pre -change element in accordance with the instruction supplied. After assembly, you can attach it to the wall with suitable screws and dowels. Make sure it is perfect and firm before you continue.
Also make sure to choose high -quality threaded rods to fasten the pre -change element to the wall and floor. You must be corrosion -resistant and long enough to fit through wall and floor.
Install and connect toilet flushing
The next step is to install the toilet flushing and connect the drain and water supply lines. You also have to install the rinsing button.
The drain pipe must be connected to the existing water outflow and the water supply hose to the cistern. Make sure that all connections are sealed tightly. Disguise of the wall hanging toilet
The last step in the toilet installation is dressed up. The convertible element and the drainage and water supply pipes are covered for an aesthetic appearance.
The cladding can be done by tiles, plasterboard, wood or other material of your choice. This should be attached around the support frame and carefully cut to enable access to the rinsing button.
A great alternative to dressing up Sanitary modules, which are perfect for wall hanging toilets with suitable operating plates and, for example, replace a tile mirror.
Fix the toilet bowl
After the wall looks chic behind the toilet, you can use the attachment of the Bowl continue. This is an important step that requires some precision. The bowl must be attached to the pre -change element with the screws supplied. Pull the screws tight to ensure the stability of the bowl. Now let water in the bowl and rinse the sample to see if the flushing and exit pipe from the drain is completely tight.
How do you choose the right wall hanging toilet?
In order to achieve the best possible result when installing your wall hanging toilet, it is important to pay attention to the selection of the accessories that the set completes. This accessories include Operating plate, the toilet seat and the bowl cover.
The actuating plate is the element with which you rinse the toilet, we offer you directly including the convertible element in our shop. This should be selected according to the design, color and compatibility with the rinsing mechanism of your pre -conversion.
It is important Choice of seat and the toilet tank cover. You should be comfortable, durable and easy to clean. You can be made of plastic, wood and with or without Soft-Close function be equipped. With the soft-close function, the lid can be closed gently and noiselessly.
Prevention measures during installation
A toilet installation should not be taken lightly. Some precautions should be taken to ensure safe and durable installation.
The first precaution that must be made is the attachment of the pre -change. Use a water scale to ensure that the support frame is perfectly horizontal and vertical. Improper attachment can lead to the instability of the bowl and drainage problems.
When connecting the drain and water supply lines, make sure that the drain pipe is angled so that the water can flow properly. A poorly angled hose can lead to drainage problems and unpleasant smells.
Finally, when it comes to cladding the pre -change, make sure that the cistern is easily accessible. This is because in the future it may be necessary to exchange the rinsing mechanism or to repair a leak.
conclusion
The installation of a wall hanging toilet requires attention to detail, patience and a certain technical skill. It is important to properly prepare your workplace, select the appropriate accessories and carefully follow the instructions for installation.
Don't forget to take the necessary precautionary measures, especially when attaching the support frame, connecting the pipes and assembly of the cladding.
If you follow these steps and take these tips into account, you can enjoy your new wall -hanging toilet in your bathroom, combine aesthetics, comfort and practicality. However, if you do not feel comfortable with this type of work, it is recommended to commission a specialist to ensure safe and permanent installation. It is important that you make sure that your wall -hanging toilet offers you long -lasting comfort.
Do you have enough of water puddles around your bathtub? Do you dream of a bathroom of well -being and modernity? Why don't you choose a walk -in shower? The so -called Walk-in shower increasingly replaces the traditional bathtub in the bathroom. In this article we show you Step by step how You your bathtub in one walk -in shower can convert.
Requirements for installation
Before you start working, it is important to take some things into account. The first is the available place. If your bathroom already has a bathtub, there is usually enough space for a ground -level shower and the circumstances for a renovation.
Then you must also take into account the drainage of the water. In the event of a walk -in shower, the shower tray should be placed on the floor at ground level. Check the existing drain and make sure that the water can flow correctly at this low level. For the conversion from a bathtub to a shower, this step is crucial to ensure that drain and shower can be installed and no water later exposes.
Cost estimate
The costs for your work depend on several factors: the size of your bathroom, the type of shower and shower tray, the conditions of the drainage installation, etc.
To help you estimate the costs of your project, you can Bernstein Use bath shop or other online simulators. This gives you a rough estimate of the costs according to your wishes in terms of material and design.
Installation of the ground -level shower
When installing the walk-in shower, like to be advised and supported by a specialist, especially if the drain has to be laid. The most important steps of the installation are as follows:
Demolition of the existing bathtub
Preparing the soil for setting the level Shower tray
Installation and connection of the drainage
Possibly laying of tiles
Installation of a Shower separation
Assembly of a Shower column
Care of your new shower
As soon as your ground -level shower is installed, it is important to maintain it regularly in order to maintain your waterproofness and beauty. So after each shower process, dry the floor and walls with a puller or cotton cloth and regularly check the condition of joints, fittings and also the drain.
The installation of a walk -in shower Is not an easy project, but as soon as the work is complete, you will enjoy your modern and functional bathroom every day.
Special equipment for your ground -level shower
You decided To convert your bathtub into a walk -in shower. To do this, you have to choose the appropriate equipment that makes your shower room as practical as it is beautiful. At the beginning you have to go for a Decide shower column. This is essential for the control of the temperature and pressure of the water. There are different types, for example thermostatic shower columns or hydromassage shower columns for more well-being. All shower columns of Bernstein Find in the web shop under the category shower.
A shower cubicle can then help you to separate the shower room and prevent water splashes in your bathroom. You can choose a glass shower cabin to achieve a slim, modern look, or for a shower cabin made of acrylic for a more economic and maintenance -friendly installation.
Also remember to choose a floor that is suitable for walk -in showers. A wooden floor is a stylish and warm option, but make sure that it is also suitable for bathrooms and showers. Otherwise, non -slip tiles can be a safe alternative, especially when children or older people use the shower.
For optimal comfort, you could also consider the installation of a instantaneous water heater for hot water production. In this way, you can quickly and continuously enjoy hot water and at the same time reduce your energy bill.
The advantages and disadvantages of a conversion from the bathtub to the shower
The exchange of your bathtub with a walk-in shower has advantages and disadvantages. Above all, advantages are an easy introduction and unrestricted freely. A flat shower is indeed easier to use, especially for people with restricted mobility, as it is barrier -free. In addition, a ground -level shower offers a modern and clear design that gives your bathroom added value.
If you convert your bathtub into a walk -in shower, this can also have some disadvantages. The first is the cost of work. The price of the conversion can be high, especially if you have to lay the drain or change the bottom of your bathroom completely.
In addition, a walk -in shower needs a good seal to prevent water from penetrating. If you like to swim, you may miss the comfort and relaxation that a bathtub offers.
conclusion
If you convert your bathtub into a flat -ground shower, you can Transform your bathroom into a modern and functional space. However, this project requires careful preparation and the help of experts to ensure correct and durable installation.
It is also important to choose devices that are suitable for your needs and budget, such as: B. shower column, shower cabin, a new floor and possibly a instantaneous water heater.
Despite the associated costs and regular maintenance, a walk -in shower offers many advantages, especially with regard to comfort and accessibility. So don't hesitate, build your bathtub in a ground -level shower To give your everyday life a touch of modernity and well -being!
Introduction
Shower toilet, which are known for their hygiene and comfort, are becoming increasingly popular all over the world. In this detailed guide you will learn how to install and maintain a shower toilet works to ensure a comfortable and hygienic experience in your bathroom.
How do I install and maintain my shower toilet?
Before installing the shower toilet: preparation and considerations
Before you start installing your shower toilet, also called Japanese toilet, it is important to take several aspects into account. Make sure you have enough space in your bathroom and check the special features of your sanitary system. It is also important to Bernstein-Model to choose that corresponds to your needs and budget if you take into account the various functions offered.
Improved installation process
A correct installation of the so -called “Japanese toilet” is crucial to ensure their optimal function. Start carefully with the proper installation of the toilet by carefully follow the step-by-step instructions that are delivered with your model. Ensure security by carrying out the necessary plumber and electrical work with the corresponding tools.
An often overlooked but essential step is to open the water valve before switching on the shower toilet. In this way, it can be checked whether everything is correctly connected and frequent errors are avoided. Many customers make the mistake of connecting the toilet to the electricity before opening the water valve, which can damage the system. So make sure that you first open the water valve, check the connections and then switch on the current to enable a carefree start.
Compliance with these work steps ensures safe installation and extends the lifespan of your Japanese toilet.
Care & cleaning
Regular maintenance of your shower toilet is essential to obtain the hygiene and durability of your shower toilet. Introduce a daily or at least weekly cleaning routine to avoid lime deposits and bacterial accumulation. If there is a problem, such as B. a water leak or an electronic malfunction, consult the manual for troubleshooting or contact a specialist.
Extended functions
Shower toilets offer many advanced functions such as seat heating, the built-in bidet or the UV-C sterilization of shower nozzle and ceramic. Take the time to familiarize yourself with these functions in order to use them as best as possible.
Integration into the bathroom design
A shower toilet can be an elegant element in your bathroom. Remember to integrate it harmoniously into your decoration and choose a model that complements the style of your space.
Environmental considerations
Japanese toilets are often praised for their efficiency in terms of water and energy consumption. You can help reduce your environmental impact and at the same time offer outstanding comfort.
Advantages and disadvantages
It is important to have the advantages, such as hygiene and comfort, against the potential disadvantages, such as: B. weighing up the cost of installation and maintenance for a shower toilet. The consideration of these aspects leads you to a more informed decision that is adapted to your needs.
Important answers to questions about the purchase and cleaning of a shower toilet
Can you install a shower toilet in a small bathroom?
Yes, there are shower toilet models that are designed for small rooms. It is important that you measure your bathroom beforehand and select a model suitable for the room.
What is the lifespan of a shower toilet?
The lifespan of a shower toilet depends on its quality and maintenance. If maintenance is correct, such a shower toilet can last for many years.
How do you deal with lime and water hardness?
To clean your shower toilet, please use special cleaning agents to combat limestone deposits. If necessary, you should also think about the installation of a water discovery so that lime does not settle in your showerwc so quickly. Do not forget to replace the associated water filters regularlyhttps: //bernstein-badshop.com/fr/wc/wc-accessoires/a-161016. Be careful, every model of the shower toilet has its own peculiarity:
Shower toilet models Bernstein Pro 1102 and 1104: Change the water filter and air filter every three months and remember to refill the descaling when it is empty!
Shower toilet model 540: Change the air filter about every three months.
Shower toilet model T640: Change the air filter every three months and fill in the descaling tank when it is empty.
Are shower toilets suitable for children and the elderly?
Yes, many models are designed in such a way that they are easy to use by people of all ages and offer tailor-made safety and comfort functions.
Are there environmentally friendly shower toilets?
Yes, some models are designed to minimize water and energy consumption, which makes shower toilets even more environmentally friendly. They also save tons of toilet paper through the washing function.
conclusion
Installation and maintenance of a shower toilet are a little more complex than that of a normal toilet, but the advantages of hygiene, comfort and environmental compatibility are worth it. If you follow these tips, you can enjoy the advantages of this innovative technology in your bathroom to the fullest.
FR
IE
IT
NL
ES
BE/NL
PL
SE
DE
CH/DE
DK
CZ
PT
